58mm Coffee Distributor & Tamper, MATOW Dual Head Coffee Leveler Fits for Portafilter, Increased Adjustable Depth- Professional Espresso Hand Tampers
$36
- ☑58mm Adjustable Distributor & Tamper-58mm base designed to work with most portafilters and espresso machine models including: Breville(the dual boiler, the oracle and the orcale touch), Rancilio, La Pavoni, Hamilton Beach, ECM, La Marzocco, Rocket, Alex Duetto, Astoria and all E61 group machines.
- ☑Consistent Brew- Get consistent distribution and pressure every time making it easy to pull your perfect shot right at home, Leveling your grounds before tamping creates a uniform and consistent tamp.
- ☑Increased Adjustable Depth for 2020- Increased height adjustability to suit any depth of portafilter basket for consistent tamping pressure, makes you enjoy same great consistent cup every time. Diamond patterned grip provides a non-slip, super comfortable feel in your hand.
- ☑Dual Head- Distributor/Leveler and tamper are designed in one, double sides are available.
- ☑Pro Tips-Ensure your portafilter basket is fully dosed with coffee grinds to get the right amount of pressure from the tamper for a tighter pack and richer flavor. For best results, groom the top of the basket with a finger or flat edge before leveling and tamping. Brew with good, filtered water.
Specification: 58mm Coffee Distributor & Tamper, MATOW Dual Head Coffee Leveler Fits for Portafilter, Increased Adjustable Depth- Professional Espresso Hand Tampers
|
10 reviews for 58mm Coffee Distributor & Tamper, MATOW Dual Head Coffee Leveler Fits for Portafilter, Increased Adjustable Depth- Professional Espresso Hand Tampers
Show all
Most Helpful
Highest Rating
Lowest Rating
J Valentin –
I use it as a distributor and as that it is fine for the price point. As a tamp, after using this i will not be using tamps of this design. It’s not because of this tamp just because i do not believe tamps of this design do there job.
SouthBarr –
This distributor dramatically improved the quality of my esspresso’s. I’ve been trying different things for months. I am so happy that I finally found this solution. It works great.
Sukrit Gupta –
The media could not be loaded.
The tamper side works fine, but the distributor is too small for a (breville) 58mm basket. It leaves coffee on the edges of the basket as the video shows because of the poor fit.
NFC –
This is a good distributor/tamper. It gets the job done, not very comfortable to tamp with but it does its job. I bought it mostly as a distributor rather than a tamper and it works well. I have a better tamper that I use but overall this is a keeper.
Joseph Hopper –
I have access to some amazing small batch roasters here in Seattle and in an effort to treat their products with the utmost respect, I purchased this gadget.
As a newbie to at home espresso making, I’m very open to anything that will assist me an pulling a consistently awesome shot. This really helps.
The distributor side is very easy to use and adjust, although based on some internet research I’ve left the setting at the lowest and only adjusted the tamping side as I’ve changed coffees.
The tamping side is much easier to use practically and consistently than a traditional tamper. It helps take a lot of guess work out of the pressure.
It fits perfectly in the 58mm portafilter of my Kitchenaid semi automatic espresso maker and works in conjunction with a dosing ring to reduce mess and waste.
I know there are more expensive versions of this available, but for a beginner I’m very satisfied with my purchase. Maybe down the line I’ll upgrade to a fancier model but I don’t see the point right now.
Santiago –
It’s easy to use and set up for the tamper depth needed, it’s nice to have a 2-in-1 tool that’s ready and easy to clean
Ken Klingler –
The thing I like most about this tamper is it’s solid construction. It has some heft to it and makes it very easy to even out the coffee grounds and tamp them down when filling your porta filter. I find it also reduces the mess and speeds up the tamping process.
Jack –
Ordered this for the sage dual boiler which is 58mm barsket but this tool is too small!
Nick –
First off, this thing is very well made. It will outlive me, my future children, everyone reading this review, and certainly the poor soul who breaks into your home/shop that it gets thrown at! I did not run into any sharp edges or surfaces that would cut someone.
I bought it to try to make it easy to train volunteers on our new Astoria Sabrina SAE 2 Group (a commercial machine), and because the tamp that came with the machine left a very small gap around the outside edges. That is the only reason that I am knocking off one star, it still leaves a bit of a gap when tamping down with a 58mm base. BUT the distributor side works great, so I’m keeping it around just for that!
The shots that it is helping pull are still good, but for a commercial setting, I want to be sure to remove every variable that I can (even if it’s only .5mm).
For the price, you won’t find a better 58mm palm tamp and distributor!
Stella R –
I am using this on a standard 58MM Rocket portafilter and am getting consistent tamps every time. My tamps are now perfectly level and the screw type adjustment let me dial into just the right pressure. Much better than the old style handle-type tamper. Solidly built and well designed.