Univen 2.25″ (57mm) Espresso Filter and Gasket Seals Compatible with Bialetti 3 Cup Aluminum Espresso Makers
$7
- Includes one coffee espresso filter plate and three gasket seals
- Compatible with Bialetti 3 cup models Moka Express, Moka Timer and Moka Melody Sport
- Compatible with Bialetti 3 cup models Dama, Fiammetta, Break and Alpina
- Filter plate is 2.25″ (57mm) in diameter. Gaskets inside diameter 2″ (51mm), outside diameter 2.59″ (66mm)
- Gaskets are made in USA of non-toxic, food safe EPDM rubber
Specification: Univen 2.25″ (57mm) Espresso Filter and Gasket Seals Compatible with Bialetti 3 Cup Aluminum Espresso Makers
|
8 reviews for Univen 2.25″ (57mm) Espresso Filter and Gasket Seals Compatible with Bialetti 3 Cup Aluminum Espresso Makers
Show all
Most Helpful
Highest Rating
Lowest Rating
Teacake –
I melted my rubber thing from my Bialetti’s espresso kettle by FORGETTING to put water inside and I put it on the stove! And of course I burned and melted the rubber.
I was so mad at myself and thought i had to buy a new pot.
But found a replacement stuff and came within 24 hours and now my espresso kettle is back and running.
penumbrook –
Got my old pot working again!
TC –
Couldn’t salvage 40 year old gasket from 3 cup Marimba stove top espresso maker. Ordered this gasket/filter kit … gasket & filter fit perfectly.
RFD –
Checked measurements with calipers, spot on. Perfect fit. I like the rubber gasket rather than the silicone ones.
Wesley R. Weber Jr. –
A little tricky to remove old filter but easy to install new filter and restores the easy production of wonderful espressos!
AndiS –
This product is on the left. The bialetti 3 cup gasket is on the right. Somehow the description leads you to believe that these are the same size and they are not. Just be forewarned!
amazon_princess –
Needed to replace the gasket in an old Bialetti-style moka pot of unknown provenance we picked up a few years ago. I measured the old gasket as well as I could, but it was a bit deformed from years of use. This item seemed the closest match, but it is still about 0.5-1.0mm too small in diameter. There is a bit of play and the gasket and upper metal filter can easily fall out while it is disassembled for cleaning. But it still works fine– once assembled the gasket creates a seal that withstands the brewing pressures. The metal filter plate itself is a perfect match for the original. So I’d rate it as “OK”, and still a decent value for the money, just not perfect.
cherto –
can’t beat a manufacture’s part. does the job!