Pressure Cooker Gaskets Silicone Sealing Rings and Universal Replacement Floater and Sealer for 5 or 6 Quart Models -Set of 7
$10
- Silicone Sealing Ring Inside diameter 8.5″, outside diameter 9.37″. Fits models IP-LUX60, IP-DUO50 , IP-LUX50, Smart-60 (Smart), IP-CSG60 and IP-CSG50,PPC770, PCXL-PRO6, and PC-TRI6
- Not recommended for other brands of pressure cookers – Made exclusively for use in the IP
- Pressure Cooker Accessories Sealing Rings and Floater valve sealer Gasket are part of the lid of Power Pressure Cooker, and are essential for pressure cooker to work
- Sealing Ring Replace every 18-24 months or when deformation is present in your old sealing rings
- The sealer is often washed off, leaving the floater loose and the pressure cooker unusable, Floater and sealer are part of the lid of Power Pressure Cooker, and are essential for pressure cooker to work
- Floater and sealer set fits many models of the Power Pressure Cookers including but not limiting to XL (6 & 8 quarts), YBD60-100, PPC780, PPC770, and PPC790
- Package Content: Set of 7 (1x Floater and 1x Sealer + 4 x Pressure Cooker Gasket Silicone + 1x Sealing Ring Silicone).
Specification: Pressure Cooker Gaskets Silicone Sealing Rings and Universal Replacement Floater and Sealer for 5 or 6 Quart Models -Set of 7
|
8 reviews for Pressure Cooker Gaskets Silicone Sealing Rings and Universal Replacement Floater and Sealer for 5 or 6 Quart Models -Set of 7
Show all
Most Helpful
Highest Rating
Lowest Rating
C.F.H –
Exactly what my power pressure XL cooker needed. The unit is close to two years old and I noticed cooking times were not very consistent, the unit had more steam escaping from around the lid while taking a longer time to pressurize, and audible hissing during cooking.
I replaced the center lid post seal, outer lid ring, and float valve seal, unit is working like new again.
When replacing the inner center post seal be careful to not bend or warp the removable aluminum lid disk, the seal pops out fairly easy but can be a bit of a challenge to insert the new one. Lay the disk flat, put a couple drops of mineral or cooking oil on the center seal, fold it in half and then pop it into the hole. The oil will help it slide on easier as you dont want to force it and risk bending the lid disk.
When replacing the float seal use a thin object to press on the float from the outside so it wont move when pressing the seal on from the inside. I used a chop-stick but a skewer or hard plastic straw will do as well.
The new lid ring does not have anything stamped on the seal regarding what direction the seal faces like the OEM seal but isnt an issue, the seal works either way.
There are additional seals in this kit that are not for the PowerPressure XL as this kit is made to cover many different brands.
Waterlady 3 –
I liked they are for TFal pressure cooker
Kimberly Wallen –
They were supper easy to install. You can’t beat the price now I can use my pressure cooker again.
J.Taylor –
I have had my pot for 5 years and “Never” thought that the gaskets needed replacement until my original pot was no good. I replaced the pot to a stainless and the pot stuck to the lid. That is when I realized I needed new gaskets. This brand and size fit perfectly and my pressure cooker works better now than originally.
rctn –
Excellent quality, sealed my Power Quick Pot 6 quart pressure cooker perfectly. Very happy this parts replacement kit was available from Amazon as parts for Power Quick Pot pressure cookers are hard to get. Very happy with my purchase from this seller and Amazon. I would definitely buy again from this seller.
marilyn –
Happy to get replacement. If u use instant pot..buy early..so u have on hand when u need it.
S. Rubio –
It was exactly what I needed to get my electric pressure cooker functioning again. All of the parts were extremely easy to install. Much better than spending a lot of money for a new one.
Daniel G. Castro –
Great product. I replaced the old part, just fine. Works great! Then, the pressure cooker died on me. It was not the fault of this product.