CGA320 G1/2 CO2 Cylinder Refill Adapter Hose, CO2 Refill Station Connector Kit for Filling soda-maker(CGA320 to TR21-4, Dual Valve With Gauge) (24…
$34
- 【High Quality Material】The 24 inch hose is braided by high quality stainless steel and is tightly connected with 100% solid brass fittings, with good air tightness, 3000PSI working pressure, strong and durable, safe and reliable. The refill adapter is equipped with a pressure gauge and has two on-off valves (for filling and venting) for easy and safe use.
- 【Inlet Thread】Filling adapter can be used to refill small CO2 tanks from larger CO2 tanks, the filling adapter is [US CGA-320(G1/2)], only suitable for the United States, Canada, not suitable for UK, Germany and other countries, if you are giving it as a gift, please make sure to be clear.
- 【Outlet Thread】The outlet thread for connecting the CO2 cylinder is TR21-4, which is suitable for most CO2 cylinders (not suitable for CO2 cylinders other than TR21-4 or clip-on design), especially not suitable for paintball tanks, As well as the latest sodastream Terraxi series water dispenser, they look similar, but the threads are not the same, they are not universal, please confirm before purchasing!
- 【Precautions】If the vial thimble is too thick and short to be inflated, the hose will expand, please replace the thin thimble bottle. The large cylinder should have sufficient pressure. If there is no siphon or liquid CO2 in the large cylinder, the CO2 atmospheric tank needs to be inflated upside down, please read the instructions carefully. Also, if you freeze the cylinders a few hours before filling, it will make filling easier and fill more gas.
- 【Quality after-sales】We are very confident in this product, so we provide one year quality guarantee, for whatever reason, you are not satisfied, please feel free to contact us, you will get a satisfactory answer.
Specification: CGA320 G1/2 CO2 Cylinder Refill Adapter Hose, CO2 Refill Station Connector Kit for Filling soda-maker(CGA320 to TR21-4, Dual Valve With Gauge) (24…
|
10 reviews for CGA320 G1/2 CO2 Cylinder Refill Adapter Hose, CO2 Refill Station Connector Kit for Filling soda-maker(CGA320 to TR21-4, Dual Valve With Gauge) (24…
Show all
Most Helpful
Highest Rating
Lowest Rating
BlueMack –
I had a problem with it at first, there was a clear plastic washer in it that I left in, I got the larger co2 cylinder with a dip tube. The clear plastic washer didn’t have the same size orifice valve and punched a small piece out which then clogged the opening. Once I cleared “ found” that it was fine. Remember your trying to do something that the maker of these bottles doesn’t want you to do and they have made it as difficult as possible. It took me several tries to finally fill a bottle am I’m getting 1200 gram to 1250 fills. I had a friend show me what he does, in short you leave the fill bottle closed, attach the SS bottle open the exhaust valve slowly, very slowly turn the threaded pin screw in until you hear it venting. Close the exhaust valve open the fill valve then the bottle valve very slowly, it’s best if your in a quiet area so you can hear the gas flowing. Keep slowly opening the valve until it stopes filling, close the bottle valve , un screw the pin open exhaust, now screw in the pin and drain some out of the bottle until the bottle starts to get cold, repeat until it’s full. You will need a scale to keep track of ware you are. It does work just needs patience and trial and error
ru68 –
I’ve had two similar products in the past. This is by far the best of the three.
Jeniffer DeVries –
Almost 5 star product. I use this to refill sodastream cannisters, and just tried it for the first time. If you follow their posted video instructions (typos and all) you should get some mostly full cannisters with little fuss. I wasn’t expecting the amount or volume of exhaust – open the valves slowly on the “exhaust” steps or you may be startled. I wish I had bought the 24 inch tubing model, as I think that would waste less CO2 (less to exhaust) and 36 inch tubing is a little bit clumsy to work with.
Docking 1 star because:
– mine leaks a tiny bit on the end that attaches to the sodastream cannisters. I think next time I refill cannisters I’ll try to remember to put a little silicone tape on the threads.
– my first attempt at ordering this, I received the wrong item (I got sent one of those direct taps that let you bypass the little cannister altogether). Had to send it back for a refund and when I went to reorder, the price had gone up about $5.
Combat Wombat –
Got this because it ‘refills SodaStream bottles’. Unfortunately it doesn’t fit SodaStream bottles, so it’s hard to say its worth even 1 star.
Melbychick –
This adapter is for American CO2 cylinders. Why is it offered for sale in UK I have no idea??
It’s does say check so it’s on me. Also note all the reviews are American.
Missed the return date so thanks very much.
Tom H. –
Works great. I have refilled 6 tanks with no issue. Just remember to freeze the tanks before refilling them, and if your filling tank isn’t a siphon tank, you have to flip it upside down.
A. Cole –
Follow the directions. Tricky, but works as promised. I’m now saving big $ on refills, paying about $2/refill vs $15 at store.
PIERRE –
Make a good job…
residualfail –
I never touched co2 tanks before and I was a little intimidated by the idea of refilling sodastream cylinders for obvious reason.
They included directions that were easy to follow and it did the trick. The newer sodastream cylinders are mean so you can’t just screw down the pin all the way or the cylinder locks and you won’t be able to fill. I screwed the pin all the way down, then backed it out slowly.
nowinvirginia –
this device sort of works. i was able to fill a SodaStream tank about 1/4 to 1/3 it’s usual capacity. The gauge on the unit is useless, in fact it distracts as gas leaks out around the gauge connection. So, for the amount of money being charged I think the product is less than stellar.