Homebrewers Outpost – MILL710 MaltMuncher 3 Roller Grain Mill Import To Shop ×Product customization General Description Gallery
- 3 Roller mill designed for homebrewing
- Adjustable cold rolled steel rollers are 5″ long by 1.25″ in diameter
- 12 lb capacity hopper
- Includes crank handle and can be used with drill (recommended 200 rpm)
- 6061 aluminum body for rust free performance
$192
Malt muncher 3 roll grain mill specifications: comes with 12 lb hopper and crank handle great for use with a power drill cold rolled steel rollers sized at 5 inch long by 1.25 inch diameter adjustable rollers at both ends to move the gap from 0 inch – 0.63 inch If motorized we recommend 200 Rpm12 TPI knurl to effectively pull grain through the rollers while still leaving the hulls intact to later form an excellent filter during the Sparge12 mm crank shaft.
Specification: Homebrewers Outpost – MILL710 MaltMuncher 3 Roller Grain Mill Import To Shop ×Product customization General Description Gallery
|
||||||||||||||
Dimensions | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
C. Coble –
Was shipped to me with parts physically brokenOne of the side pieces has some of its metal shaved off. This causes the knob to not be able to turn.I ordered this in early April and then needed surgery in mid April so didn’t get a chance to open the package until early May. Noticed one of the knobs not turning so I had to hammer it out to see a dent in the hole where the knob goes. Can’t return it now and makes it useless without one of the sides working.
Scott Lipke –
GreatPerfect