HDMI RF Modulator Coax Adapter 1080P Input Coaxial Output Converter with Male F Type Cord for Roku Fire Stick VCR PS3 PS4 PS5
- RF Modulator – HDMI to coax converter will hook up your streaming media players ( Apple TV, Amazon Fire Stick , Fire TV, Roku , etc.) , game consoles ( PS3 , PS4 , PS5 , Xbox 360 , Xbox One etc.), DVD , Blu-ray players , VCR , Laptop , PC or computer etc. newer HDMI-equipped components with an older TV or video equipment; Then you can watch videos / play games / sharing old pictures / photos on channel 3 on old TV models (CRT) and other non-HDMI devices.
- HDMI to Coaxial Cable Adapter for TV – Convert HDMI digital signals into VHF analog TV ( RF ) signals which are great HDMI extenders that will carry out ultra long distance transmission of HDMI signals , then you can achieve sharing program videos / pictures on other tvs in diffrent rooms or farther away from the hdmi video source.
- RF HDMI Modulator – HDMI in F Type Female ANT ( antenna ) out with coaxial RF analog signals, Plug and Play , easily & reliably connect your new HDMI devices to RF coax display .
- HDMI Modulator – Switch the output screen up and down as well as amplitude , brightness , contrast and chroma via the remote control with the zoom function ;(the image quality will be lower than RF analog signals (more like 480p); NOT applicable to ATSC format !)
- HDMI in RF Out – Please check your TV supported formats before placing an order because this converter only output PAL-BG , PAL-l , PAL-DK and NTSC-M these four TV formats, if your TV does NOT support one of these 4 , the converter will not work ! And this is HDMI to RF coaxial converter which does NOT work under the reverse direction,please don’t use it to convert RF signal into HDMI signal!
Free!
From the brand
Product Description
HDMI to Coaxial RF Converter for Old TV – HDMI in Coax Out Transmitter Box with F Type Male to PLA 9.5mm Coaxial Cable & Remote Control RF Modulator
AoeSpy HDMI to RF Modulator Quick User Guide
- Plug and Play：No additional driver/software required, very easy to use.
- Video & Audio Signal Output without Delay : FHD 1080P@60FPS Video with HDMI input, NTSC/PAL anlog RF Video & Mono Auido signal output.
- NTSC-M/PAL-BG/PAL-l/PAL-DK Selectable : The default setting is NTSC-M standard format which is met most TVs in North American.(The item will work improperly if you use other standard format, please switch the standard format by the SYS key on the included remote control )
- CH3/CH4 TV Channel Selectable：The default setting of output is channel 3 and you can switch to channel 4 through the remote control when channel 3 is occupied (Channel 3-61.25MHz, Channel 4-67.25MHz).
- Video ZOOM : 10 levels picture zoom function is convenient for you to observe the details of the video, browse the monitoring picture.
- IR Remote : The infrared remote control has more special and interesting functions waiting for you to explore!
Warm Tips:
- If the old TV that has been stored /on hold for a long time, you need to power on and warm up for 1-6 hours until the picture can be displayed normally before attempting to connect to the device, then the work can get better results.
- If the indicator light on the item is red that means there is NO HDMI input signal, please check if the HDMI video source and HDMI cable are working normally or try with a new hdmi cable & device!
- The picture and sound are abnormal:It may be the output format is set incorrectly, please adjust according to the system supported by the TV (The standard format of TVs in The United States, Canada, and Mexico should be NTSC).
- The remote control does not work : Please check whether the battery insulation gasket has been removed.
HDMI to Coaxial RF Converter for Old TV – HDMI in Coax Out Transmitter Box with F Type Male to PLA 9.5mm Coaxial Cable & Remote Control RF Modulator
HDMI to Coaxial RF Modulator Converter For TV
The RF modulator is a HDMI to coax converter adapter & coaxial cable set which converts hdmi signal into RF signal, helping hook up your Roku / Fire stick / Apple TV / DVD / Blu-ray player / game consoles / Set-top box or PC computer etc. hdmi video source devices to your RF splitter to share the program on multiple screens , or to televisions that come with coax analog signal ( without HDMI output ) directly to dispaly tv program videos, even to connect your security camera / CCTV surveillance equipment to the monitor , projector or TV , then you can monitor the surveillance video screen while watching TV if your TV supports Picture-in-picture function; No more cables nor accessory behind each television , plug & play with the included cables immediately for any applications.
The Steps to Use the Item：
- Please remove the insulation piece on the battery compartment of the remote controller to ensure that the controller works properly.
- Connect the converter to your old tv with the included RF cable and adapter; Power on the device and the red indicator will be light on; Then, connect it to your HDMI output source ( DVD / Blu-ray player, game consoles, Set-top box ) with a hdmi cable until the red indicator turns green.
- Set the TV to channel 2 or 3, press the Mode button until you are able size the picture correctly on your TV.
Special Extension
Share HDMI Device to All TVS at Home
Generally, HDMI devices have a very short distance limit when connecting to a TV. Through this converter, there is no longer a distance limit. Share TV box programs, Blue-ray DVD Player, PC, Laptop, Game Console or Security DVR to all TV sets at home through TV channel 2 or 3.You can even watch surveillance on all TVs in your home through this device.
Warm Tips About How to Use This Item：
- Please use the channel search of TV to get the signal, then press “SYS” to switch PAL / NTSC to match your TV signal until the picture and sound of tv are clear (The default setting of product is grayscale PAL and find “USER” from “SYS”).
- When the indicator of the converter is red that means there is not any HDMI signal input ; If the light is green , that means there is HDMI input .
- If your HDMI source works well and the indicator is red , please try again via another HDMI cable to ensure the converter can receive the video signal properly.
- The item ONLY supports mono sound output.
- When power is turned off to the RF converter it did loss the setting and needed to be set up again.
Specification: HDMI RF Modulator Coax Adapter 1080P Input Coaxial Output Converter with Male F Type Cord for Roku Fire Stick VCR PS3 PS4 PS5
|
||||||||||
| Dimensions | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||
10 reviews for HDMI RF Modulator Coax Adapter 1080P Input Coaxial Output Converter with Male F Type Cord for Roku Fire Stick VCR PS3 PS4 PS5
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
MSI Gaming GeForce GTX 1660 Super 192-bit HDMI/DP 6GB GDRR6 HDCP Support DirectX 12 Dual Fan VR Ready OC Graphics Card (GTX 1660
★★★★★
- Camera: -
- Flight time (m): -
$240
VSDISPLAY 14.9″ 1280×390 LCD Screen LTA149B780F with HD-MI DVI VGA Audio Controller Board M.NT68676, for DIY 1up Cabinet/Car
★★★★★
- Camera: -
- Flight time (m): -
$125
uxcell 2 Inches 57mm Bass Speaker Passive Radiator Auxiliary Rubber Vibration Plate Subwoofer DIY Repair price checker
- Camera: -
- Flight time (m): -
$9
User in Ohio –
Don’t use the remote unless you have to. I accidentally pushed a button and spent an hour trying to get it back..once you get this device into a certain mode, you can’t see the picture or menu on the TV. However, it does do what it’s supposed to. It converts the signal to coax and I’m now watching satellite programming on a 1980’s TV.
Ruba –
The unit works fine for what I needed. Converting a digital signal to an old a anaog TV. The cords you get are very short and needed extenions.
SteveO –
This worked fine. Except, I was looking for a switch that had an HDMI in and out. This had the HCMI in and converted to Coax but did not have another plug in to continue the HDMI. But if you want an inexpensive switch of HCMI to Coax this works fine.
Ed –
Unfortunately, people who have given this product low ratings have no idea how to set it up for maximum performance! “Older TV’s” were specifically mentioned as the marketing target. But apparently what very few people realize, is that HDMI cables have a very big problem in general … and that is, they are usually very short! So, you can forget about connecting HDMI cables to TV’s that are 25 feet or more away from the HDMI signal source, whether that signal source is a DVR, or a DVD player, Blue Ray player, or a cable box. But this product takes HDMI signals and outputs them on analog TV channel 3. What almost nobody knows, is that all TV’s in the united states use the NTSC-M method of signal transfer. NTSC-M must be selected in the pop-up menu, or your picture will be terrible, flickering, and mostly without color! But what really makes this product outstanding, is that it will allow you to ideally adjust your picture for whatever TV you are trying to display it on, regardless whether that TV is brand new, or an antique from the 1960’s! The picture can be adjusted (independently), in Hsize (horizontal size), Vsize (vertical size), brightness, contrast, saturation (color level), hue (tint), and sharpness! Furthermore, since the output is RF (only analog TV channel 3), if you use a cable splitter (or even better, an amplified splitter), you could connect multiple TV’s to the output signal, and have virtually perfect pictures on numerous TV’s throughout your house or building! Is it 1080P on every TV? No, it’s not, but the picture certainly is pleasing and the color is very good too, especially considering all the adjustment possibilities the remote control offers! I personally use a remote control extender, so I can control all the adjustable options from a distance, and even from a different floor! One way to cause problems with this device, is to plug in an HDMI source BEFORE connecting the power supply. That would be asking for trouble! The bottom line (for me), is this device deserves five stars for overall results, for HDMI quality via TV channel 3!
Isaac –
I was really skeptical about this product to begin with, thanks to the small number of reviews/poor reviews. However, I decided to give it a shot anyway, and I’m glad I did! My goal was to turn an old 13″ Newtech CRT with no AV ports into an extra monitor for my PC. So I hooked up the converter, powered it on (before powering on my PC, an important piece of advice given in the manual), attached the HDMI cable from my PC to the converter, turned on the old TV, changed it to channel 3 (the channel for all external audio/visual devices) and…the screen started to scan at a high rate, making it unusuable. So then I simply used the “SYS” button the converter’s included remote control to change the output from “PAL-DK” to “NTSC-M” (for North American TVs), and my desktop came beautifully and crisply into view. I then used the “MODE” button to turn the display to “BRIGHT”, so that the dimming effect exhibited by a lot of old CRTs was mitigated. Then, I dragged VLC player from one of my other monitors over to the CRT, set its aspect ratio to 4:3, and now I can play videos on the CRT in beautifully retrograde fashion.I’m very happy with this product, and it saved me from having to settle for a less appealing CRT with AV ports. My only complaint is that the power cord for the converter is too short, which means I’m going to have to do some extension cord rigging to get it to work with my setup. But oh well, that’s a small price to pay for turning a cool old TV into a PC monitor.
Rich –
I just purchased this product and it works better than I expectedit is easy to set up if you use the instructionsset the channel to cable tv 3 even if you do not have cable tv it broadcasts only on one channel once you receive a signal. (I have only an antenna that was connected to the cable tv threaded portion of the TV) The mode button will size your picture Vertical and horizontal, press SYS to choose PAL if you are overseas NTSC-M if you are in the United States you will also see it is on NTSC-M in the mode and you can change it from there also by pressing the arrow keys you can use mode to chose sharpness brightness etc also you tv settings will give you a better picture the device is set to PAL as a default so make sure you are in NTSC-MI currently use this device on a wide screen small and display my Roku device through the cable tv threaded post and see it in picture in picture mode on the TV I also have in the background my computer screenThis device works excellentlly the bad reviews are unwarrented you need to finish setting it up properly I have had no problems what so ever I recomend this product it is a substantial savings over buying an expensive RF Modulator if you are not broadcasting to a companies network and to multiple sources or networks there is nothing wrong with this device it just needs to be set up properly and you are good to go
Ken Yellig –
It somewhat converts HDMI to coaxial but picture quality is grainy with lines and snowy picture. Today everything uses HDMI cables, but I have DVD recorder that need a coaxial connection
angela9mx –
funciona pero no viene con el cable con el que lo anuncian ni la pila del control remoto
Si me funciono pero el cable que anuncian no es el mismo con el que entregan, por suerte tenia uno si no hubiera tenido que comprar el adapatador, creo que si lo anuncian deberian ponerlo, y tampoco trae la pila del control remoto tuve que comprarla por separado, creo que deberian agregar eso o avisar que no lo tiene y asi poder estar prevenida y tenerlo con anticipacion.
Alberto A. –
Problema de funcionamiento
Compre el convertidor hace unos meses funcionó bien, hace unos días dejo de funcionar (no cambia de color rojo a verde), intente arreglarlo como dice el manual y no funciono, una persona (Javier) me recomendó algo más y tampoco funciono, por cierto gràcias por intentar ayudar.Ahora el convertidor sigue sin funcionar
chuck hird –
Does it’s job
Seems to work fine , no issues