Goldlion Lid Stand Silicone Lid Holder Accessories Compatible with Ninja Foodi Pressure Cooker and Air Fryer 5 Qt, 6.5 Qt and 8 Quart, Black
$10
- 【SPACE SAVER】Stack up the pressure lid and the crisping lid with this little lid stand, to save space and keep your kitchen neat and tidy.
- 【PREVENT SCRATCHES】The 1.2 inch-thick lid holder perfectly keeps a sufficient space between the 2 lids, leaving no scratches at all to the lid.
- 【EASY TO USE】Just put the lid holder on the fryer lid, then the pressure cooker lid on top.
- 【SIMPLE TO CLEAN】Dishwasher safe because of its silicone making, makes clean up a breeze.
- 【DESIGNED TO FIT】Bespoke lid stand with a 4.2-inch diameter, specifically for the Ninja Foodi pressure cooker and air fryer 5 Qt, 6.5 Qt and 8 Quart.
Specification: Goldlion Lid Stand Silicone Lid Holder Accessories Compatible with Ninja Foodi Pressure Cooker and Air Fryer 5 Qt, 6.5 Qt and 8 Quart, Black
|
10 reviews for Goldlion Lid Stand Silicone Lid Holder Accessories Compatible with Ninja Foodi Pressure Cooker and Air Fryer 5 Qt, 6.5 Qt and 8 Quart, Black
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
HOMEST 2 Compartments Carry Bag for 6 Quart Instant Pot, Pressure Cooker Travel Tote Bag Have Accessory Pockets for Spoon, Measuring Cup, Steam…
★★★★★
- Camera: -
- Flight time (m): -
$32
Goldlion Lid Holder Lid Stand Accessories Compatible with Ninja Foodi Pressure Cooker and Air Fryer 6.5 Quart and 8 Quart (Patent Design)
★★★★★
- Camera: -
- Flight time (m): -
$19
Pressure Cooker Jigger Valve, Universal Pressure Cooker Relief Jigger Valve Exhaust Valve
★★★★★
- Camera: -
- Flight time (m): -
$6
NaomisNirvana –
This product works perfectly. Easy, secure store on top of my unit with no scratches!
Kim –
I have found this to be a great little item! I resisted buying it earlier, and that was a mistake. Having the additional lid for the Ninja Foodi for pressure cooking made a storage logistic nightmare! It took up a lot of space in my cabinet. I really didn’t see how the lid holder was going to work, but I finally purchased it anyway. IT. IS. A. GREAT. ITEM! Because it holds the lid directly on top of the Foodi, it just uses an extra few inches of vertical space, so really none at all! My only “complaint”, which is my own fault, it that the item is black as is my Foodi. The first time I used it, I forgot to remove the lid stand from atop the Foodi thus blocking the vents. It didn’t do any harm, but the cooking time was greatly increased! Just one of those things you only do once! I highly recommend this item!
Amazon Customer –
fits perfectly,brilliant.
ilovedaisies –
This is a revolutionary product. Simple and ingenious.
When I was waiting for my new Ninja Foodi 5.0 qt. to arrive, I was thinking I’d, likely store the pressure cooker lid in my oven. I didn’t want it to get scratched up, nestled in with other pots and pans. But, then, I stumbled onto this strange object. And I’m so glad I did! Who knew someone had invented a silicone non-scratch topper for the crisper lid that would allow the pressure cooker lid to piggy-back on it? Ninja should show this, as an essential accessory in it’s videos.
Actually, when I first stumbled onto the black one, I had difficulty making out just what it was or why I might need it. Wow! Who knew? Then, it was which color should I choose? But when I read the reviewer who wrote he got the orange one so he wouldn’t forget to remove it — you’re not supposed to leave it on, during use — I knew orange had to be the choice. I confirmed for myself, first, I wouldn’t be able to see it, when the lid was in storage…
Very sturdy and solid product! Pressure lid can be stored on top in any direction. With my 5.0 qt., I’m able to have the lid holder and pressure lid on, and still have it fit nicely under my kitchen cabinet.
Don’t hesitate! Get one!!!
SLQ –
I wasn’t quite sure about this accessory when I was researching all the possibilities…but once I received my Ninja Foodi 8 qt. and started using it…I came to the conclusion almost immediately, that I in fact NEEDED this accessory. It’s a very simple design, but VERY useful. It fits perfectly on top of the AF crisper lid and allows you to safely rest the pressure cooker lid on top so you actually have a place to store it. In the days between receiving my Foodi and actually receiving this item, I found myself moving the pressure cooker lid around A LOT cuz I didn’t have anywhere to really put it! This accessory is made out of a very nice, durable silicone material. It was a great purchase and one I’m very glad I made. It already is one of my favorite accessories cuz I now know the pressure cooker lid, always has a place to be safely stored and out of my way. The holder doesn’t actually “hold” anything, is just provides a resting point/bumper between the top of the AF lid and the pressure cooker lid. You just gotta make sure to remove it before using the crisper lid as it covers the AF vents.
Debbie Lee Wesselmann –
You must be careful to remove this silicone lid holder when you use your Foodi since it blocks the top vent. Each time you take out the Foodi, get in the habit of removing it first thing. It works well to keep the pressure cooker lid on top, although the lid is balanced there, not secured. If you lift the crisper lid, the pressure cooker lid will fall off. It does not hold the broiler rack, so you’ll still have to store that separately.
Despite the drawbacks, this silicone accessory does what it’s supposed to do: hold the pressure cooker lid in place for easier storage on top of the Foodi.
— Debbie Lee Wesselmann
zag1999 –
Recently purchased an 8qt Ninja Foodi , I really like it but it is a behemoth. Most things do store inside of it, but the pressure lid. It to is pretty large and does take up a lot of real estate. I came across the Goldlion Lid Stand holder and thought I would give it a try. Boy am I glad I did. You place the Goldlion Lid Stand over the silver ring on top of the Foodi, and the pressure lid will balance on top of it. You do not have to worry about scratching or marring the pressure lid because the Goldlion Lid Stand is made of Silicone. I have not said anything about all the freebie’s this company will give you when you purchase it. An additional gift coupon comes with the Lid Stand that can be redeemed for 1 of 4 items. They have sent me a link for Foodi beginners cookbook. I must say I am really please with my purchase. I would recommend the Lid Holder to anyone.
J.A. –
I love my Ninja Foodi and this was a must have for me. The pressure cooker lid was always rolling around my cupboards and counter top. This lets me place it securely on top of the Foodi. Its a bit hard to get it on though. You have to pull the tab to stretch it so that it will fit. The tab seems a bit flimsy so I am worried it might break. That’s why I deducted 1 star. Other than that, the rest of it is good quality and does the job. A bit pricey though for silicone.
TJ –
Helps me keep all my ninja foodie parts together and saves space.
Thomi L –
I needed a way to store my Ninja Foodi PC lid that would prevent scratching the lid or my Foodi. Ideally I wanted to keep it on top of my crisper lid with the Foodi and under the dust cover to save space. The Goldlion lid stand silicone lid holder seemed like the perfect solution. Once it arrived I noticed how well made it was; solid and not flimsy. I washed it by hand which was easy and placed it on my Foodi. It fit the top of the Foodi crisper lid well and did not wiggle. I placed the PC lid over the silicone lid holder and it was very stable. It didn’t move when I slid the dust cover over it. I’ve had it for over a week and the lid holder has held my PC lid for all of that time and it has held its shape and done what it’s designed to do. I’m very happy with my purchase and would recommend the Goldlion Lid Stand Silicone Lid Holder to anyone who would like to store their Foodi PC lid on top of the crisper lid.