iPower tapete térmico para plantón, tapete térmico hidropónico caliente con diseño impermeable duradero, solamente
- Professional reliability: digital temperature controller for heat mat in colder or warmer environments; Package include: 1 pack iPower digital heat mat thermostat controller.
- Temperature range: digital thermostat provides temperature control between 40°F – 108°F (5-42°C); Temperature Display Range: 32 -140°F. Choice of Celsius or Fahrenheit readout.
- Technical specfications: 120 Volts / 8.3 Max Amps /60 HZ / 1000 Watts; Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug.
- Variety of uses: Heat mat thermostat provides constant customized temp for Seed Germination, Rooting, Reptiles, Homebrewing and Fermentation, keeping your various environments in their ideal temperature range.
- Note: please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment.
$20
iPower heating pad thermostat can provide constant customized seed germination, crawling and brewing temperature. It is ideal for maintaining the rooting temperature in the tray and dome. It is very suitable for maintaining the required fermentation temperature in home breeding and is very suitable for temperature control of reptiles and small pets. The heating pad controller is compatible with all heating pads, but optimized for iPower seedling heating pads:
1. Digital temperature controller for heating pad.
2. Provide a constant temperature for the living environment of specific crops.
3. Specifications: 120V / 60HZ / 1000W.
4. LED indicator light and three-hole grounding plug are easy to operate.
5. Convenient LED heating and power indicator light allows you to check the status of the controller even in complete darkness.
6.Can be used with iPower heat mat to make a warm and comfortable growth environment for your reptile even in cold winter.
NOTE:
1. Do not immerse the digital controller or thermostatic sensor probe in liquid or very wet soil
2. Abnormal warning: If the thermostat displays “E1”, it means the actual temperature is below 0 ° C or 32 ° F. If the thermostat displays “E2”, it means the actual temperature is higher than 60 ° C or 108 ° F. If the thermostat displays “E3”, it means the temperature sensor is not working properly, please reinstall the sensor.
Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat and set the desired temperature.
INSTRUCTIONS:
1. To adjust the temperature setting, press and hold the “SET” button for 3 seconds to enter the temperature selection mode.
2. To display in degrees Celsius, press and hold the “Down” button for 3 seconds; press and hold the “UP” button for 3 seconds to display the temperature in Fahrenheit.
3. Press the “UP” or “DOWN” button to adjust the temperature you want to set.
4. Press the “SET” button again. This completes the set temperature.
Más información del producto
Specification: iPower tapete térmico para plantón, tapete térmico hidropónico caliente con diseño impermeable duradero, solamente
|
||||||||||||||||||||||||||||||||||||
Dimensions | ||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SnakeMan665 –
Does a great job at holding the temp level and have held up well.
Martindd –
Works well
Amazon Customer –
This is an additional item for my heat mat. Pretty straightforward and works fairly well. Heat doesn’t quite reach what you set it at but overall works.
misfitsailor –
We use this to control a ceramic heater in a chicken coop. It works well, and remembers the temp setting even after a power outage.
Storm –
I ordered a NEW Thermostat controller, but received an obviously USED & ABUSED unit (DIMPLED LCD power light, DEEP SCRATCHES, SMUDGED & SOILED (food or ??? – yuck!). After submitting requested personal purchase information & a copy of the Amazon receipt by email to iPower, I was immediately sent a replacement – not soiled, although still also somewhat scratched on the face. I’m very satisfied with the cordial & responsive Customer Service. What a pleasure & surprise to not be forced to fight for what I’ve been promised or paid for!So far, after less than one week of use, this thermostat is super simple to use & has performed as represented by the seller/manufacturer. I have a surge protector plugged into the unit controlling power to a large pet heat mat (cat/dog hard plastic design, 90Watts), along with a large heated bird perch (Toucan sized, 9Watts), set at 40 degrees F, used in a 4 cubic ft, insulated chicken coop. The design of the thermostat control unit afforded easy attachment to a convenient, weather protected upright beam on the exterior of the coop. The sensor is dangling in a protected, screened-in area in a lower corner of the enclosed coop. My thermostat is successfully reading ambient air temps in the area of the sensor. The unit’s ‘heating’ light & temperature LCD display indicates that the thermostat opens the circuit at about 39-40 degrees & the two mentioned appliances do indeed provide heat as long as it is colder than 40 degrees. It closes the circuit at about 40-42 degrees, preventing over-heating of the enclosure & eliminating unnecessary electric consumption. I can imagine this little ‘heat’ thermostat being valuable in a wide range of applications where open circuitry is reliant on a specified heat requirement of a specific area. [Obviously, for ‘cooling’ purposes, opposite circuitry would be necessary & a ‘cooling thermostat’ required.]This thermostat simply opens & closes the electric circuit (power to) the ‘plug in’ receptacle molded into the unit’s bottom, according to the one (1) temperature you digitally ‘set’ & is ‘read’ by the specifically positioned sensor … designed to control power supply based on a ‘near’ temperature (2-3 degree variance) to a specific appliance (more than one appliance if using a multi-plug adapter or surge protector) within ‘total’ safe amp/watt limits. The plug receptor on the unit will even accept a large gooseneck type outdoor 3-way adapter without interfering with the sensor line or power input cords, but this method may prove to be too heavy & susceptible to dislodging.This unit allows my heating appliances to operate (use power) when needed – NOT CONSTANTLY! 24 hr or high constant temp designed heat sources (appliances, such as mine) could cause over-heating & stressing of my cold acclimated hens – not to mention, wasting my time & electricity. Here, in an already frigid (Sept), high altitude, this unit seems to be the solution to better management of my time, as well as (most importantly) safe, happy, healthy & cool (but not frozen) chickens! If it continues to operate with the current (admittedly short term) consistency & quality, this thermostat is a winner! If not, I’ll be back with another honest update & change in ‘coop accommodations!’
Bill D. –
Keeps the heat mats at the perfect temp for germination and growing of plants using them to start garden seeds in side in cold basement! Works great planning on buying more!
Shane Doverspike –
My only issue is the red light display, should be green.
Tiffany Hall –
I have bought these before with no issues until a few months down the road. I use them for a couple of my snake racks in our quarantine room and usually they do well..but these that I just purchased are not so great. They are not reading the temps accurately, therefor I have to set the temps to about 8 degrees higher than I want the tape to be. This scares me because I worry they will decide to spike the temps randomly when we are not home. We are converting over to ambient in the next couple months, so as long as they last until then, we will be fine. I recommended these at one point, and I still do…but only if you’re using them to regulate heat mats for plants, dubia roaches, or maybe geckos like cresties, tokays, and other sticky fingered geckos/frogs. Not the worst, but I have had better. Not too thrilled this go round. This has actually caused a couple of my snakes to get RI, which can also be deadly. I have experience and the equipment and was able to treat them to get them cured without spending thousands on vet bills, but others may not be so lucky. A quick calibration on the temp monitoring sensor may help with this issue.
Imad –
Almost there
The only complain for 4 stars, as always is with the bad packaging, other than that it is perfect and get the job done, i using it with my baby quails, and I’m happy with the result.
Tradesman –
Works fine
Works fine, installed a power bar for mutiple mats and have everything plugged into a timer and works good.